Welcome to DU!
The truly grassroots left-of-center political community where regular people, not algorithms, drive the discussions and set the standards.
Join the community:
Create a free account
Support DU (and get rid of ads!):
Become a Star Member
Latest Breaking News
General Discussion
The DU Lounge
All Forums
Issue Forums
Culture Forums
Alliance Forums
Region Forums
Support Forums
Help & Search
Solar still made of bubble wrap could purify water for the poor
Solar still made of bubble wrap could purify water for the poor
By Robert F. ServiceAug. 22, 2016 , 11:15 AM
Solar stills can make tainted water or seawater fit to drink. But to produce more than a trickle, devices typically require expensive lenses or other equipment. Not anymore. Today, researchers report that they’ve created a cheap solar still from bubble wrap and other simple materials.
Solar stills have been used for thousands of years. The most basic versions are water-filled vessels with black bottoms that absorb the sun’s rays, increasing evaporation of the water inside. Glass or other clear material on top captures the vapor, and the condensate drips into a collection vessel. To speed up this process, modern versions use lenses or mirrors to collect about 100 times more sunlight. But the high cost of these solar concentrators, typically on the order of $200 per square meter, makes them unaffordable for many people.
Two years ago, researchers led by Gang Chen, a mechanical engineer at the Massachusetts Institute of Technology in Cambridge, unveiled an efficient solar absorber made from a layer of graphite on floating carbon foam. The two layers were perforated, allowing the water below to wick up to the graphite, where it was warmed by the sun. The device worked, but much of the energy in the sunlight radiated away. To boil water, the still needed additional devices to concentrate 10 times the ambient sunlight to overcome the infrared losses.
Chen and his colleagues wanted to do away with the extras. They kept their idea of a spongy insulator floating on water. For their current experiment, the researchers replaced the graphite solar absorber with a thin layer of a bluish metal and ceramic composite material used in commercial solar water heaters. This material selectively absorbs visible and ultraviolet rays from the sun, but it doesn’t radiate heat in the infrared. Between this layer and the foam, they placed a thin sheet of copper, an excellent heat conductor. The researchers then punched holes through the sandwichlike layers as before.
A problem remained. Much of the energy absorbed by the composite was being swept away by convection, heat lost to the air moving above the still’s top surface. The fix came from Chen’s 16-year-old daughter, who was designing a cheap greenhouse for a science fair experiment. She found that a top layer of bubble wrap acted as an excellent insulator. So Chen and his student George Ni covered their solar still in bubble wrap. And in today’s issue of Nature Energy they report that their setup allowed them to boil and distill water with no extra solar concentrator. Down the road, Chen estimates that this will allow them to make large-area solar stills for about one-twentieth the cost of conventional technology...
http://www.sciencemag.org/news/2016/08/solar-still-made-bubble-wrap-could-purify-water-poor
By Robert F. ServiceAug. 22, 2016 , 11:15 AM
Solar stills can make tainted water or seawater fit to drink. But to produce more than a trickle, devices typically require expensive lenses or other equipment. Not anymore. Today, researchers report that they’ve created a cheap solar still from bubble wrap and other simple materials.
Solar stills have been used for thousands of years. The most basic versions are water-filled vessels with black bottoms that absorb the sun’s rays, increasing evaporation of the water inside. Glass or other clear material on top captures the vapor, and the condensate drips into a collection vessel. To speed up this process, modern versions use lenses or mirrors to collect about 100 times more sunlight. But the high cost of these solar concentrators, typically on the order of $200 per square meter, makes them unaffordable for many people.
Two years ago, researchers led by Gang Chen, a mechanical engineer at the Massachusetts Institute of Technology in Cambridge, unveiled an efficient solar absorber made from a layer of graphite on floating carbon foam. The two layers were perforated, allowing the water below to wick up to the graphite, where it was warmed by the sun. The device worked, but much of the energy in the sunlight radiated away. To boil water, the still needed additional devices to concentrate 10 times the ambient sunlight to overcome the infrared losses.
Chen and his colleagues wanted to do away with the extras. They kept their idea of a spongy insulator floating on water. For their current experiment, the researchers replaced the graphite solar absorber with a thin layer of a bluish metal and ceramic composite material used in commercial solar water heaters. This material selectively absorbs visible and ultraviolet rays from the sun, but it doesn’t radiate heat in the infrared. Between this layer and the foam, they placed a thin sheet of copper, an excellent heat conductor. The researchers then punched holes through the sandwichlike layers as before.
A problem remained. Much of the energy absorbed by the composite was being swept away by convection, heat lost to the air moving above the still’s top surface. The fix came from Chen’s 16-year-old daughter, who was designing a cheap greenhouse for a science fair experiment. She found that a top layer of bubble wrap acted as an excellent insulator. So Chen and his student George Ni covered their solar still in bubble wrap. And in today’s issue of Nature Energy they report that their setup allowed them to boil and distill water with no extra solar concentrator. Down the road, Chen estimates that this will allow them to make large-area solar stills for about one-twentieth the cost of conventional technology...
