HomeLatest ThreadsGreatest ThreadsForums & GroupsMy SubscriptionsMy Posts
DU Home » Latest Threads » Forums & Groups » Topics » Home & Family » DIY & Home Improvement (Group) » Need advice on polishing ...

Tue Jan 19, 2021, 11:32 PM

Need advice on polishing brass items

I have a bunch of smallish (under 8" tall) brass (and some other metals) statuettes that have been in storage for years. Most are just slightly tarnished but a few have some green and white corrosion. None are valuable, most were found at thrift shops or discount places.

I need advice on cleaning them up. I looked online and found three routes to polishing them.

First - Bar Keep's Friend, liquid version. The woman in the video I saw said was really easy to do using a soft cloth and it did look easy but I am not sure if she edited the video to cut out the hard parts.

Second - white vinegar, salt and aluminum foil. The acidity of the vinegar with salt allows some sort of electrolysis action with the foil. I tried that out tonight since I had those in the house. It worked, but it took a lot of scrubbing to get the black coating that the process leaves. My hands can't take that. In fact by the time I got to the fourth little horse I tested it on, I just couldn't finish so it's still a little tarnished. It did get the corrosion off.

Third - Dremel polishing pads with a polishing compound. I have a Dremel with some polishing pads but no polishing compound. I was real tempted to try the pads on the horse that I couldn't finish without using a polishing compound but was too tired to deal with it. None of the local stores carry the recommended polishing compound and I have on hold an Amazon order with polishing compound and a set of various sized and shaped polishing pads - my Dremel set only has flat, round ones. I'd have to invest about $25 to get both things.

I have maybe a couple of dozen brass horses, then some iron ones with minor rust and corrosion, so the Dremel is very tempting since it won't wear my hands out as much as hand polishing. Plus a couple are mounted on wooden bases so could not be dunked in the vinegar bath method and I am not sure I'd want to expose them to the Bar Keep's Friend.

Any other suggestions?

12 replies, 1391 views

Reply to this thread

Back to top Alert abuse

Always highlight: 10 newest replies | Replies posted after I mark a forum
Replies to this discussion thread

Response to csziggy (Original post)

Tue Jan 19, 2021, 11:35 PM

1. We used Brasso on belt buckles and such in the Army

but they're small and relatively flat, so I don't know how it would work on brass horses, but I can testify that it really makes buckles *sparkle*

Reply to this post

Back to top Alert abuse Link here Permalink


Response to Glorfindel (Reply #1)

Tue Jan 19, 2021, 11:38 PM

3. Oh - I used to use that on thge brass fittings on my horse tack

Then they got into making the fittings out of stainless steel and I stopped worrying about polishing - just rinse them off and they are good to go.

I'll put that on my shopping list with the Bar Keep's Friend stuff. Thanks!

Reply to this post

Back to top Alert abuse Link here Permalink


Response to csziggy (Original post)

Tue Jan 19, 2021, 11:38 PM

2. Brasso and a soft toothbrush if there are lots of details. nt

Reply to this post

Back to top Alert abuse Link here Permalink


Response to csziggy (Original post)

Tue Jan 19, 2021, 11:43 PM

4. Agree about the Brasso. Flitz will also work.

Reply to this post

Back to top Alert abuse Link here Permalink


Response to rsdsharp (Reply #4)

Tue Jan 19, 2021, 11:49 PM

6. Flitz is what the guy in the polishing with a Dremel used and recommended

He also showed using the red stuff (rouge?) that Dremel provided in a kit and some green polishing compound, but he liked Flitz best.

Reply to this post

Back to top Alert abuse Link here Permalink


Response to csziggy (Reply #6)

Tue Jan 19, 2021, 11:53 PM

8. Flitz will work with a soft cloth, too. Renaissance wax

will do light cleaning, and itís also a great way to deter tarnish, although itís a little expensive.

Reply to this post

Back to top Alert abuse Link here Permalink


Response to rsdsharp (Reply #8)

Wed Jan 20, 2021, 12:33 AM

10. I just added Renaissance Wax to my shopping list

I want this to be the last time in my lifetime that I have to clean these things. Plus, I have other horse statuettes in my collection that are of materials they list that could use some less aggressive cleaning and protection.

Thanks!

Reply to this post

Back to top Alert abuse Link here Permalink


Response to csziggy (Original post)

Tue Jan 19, 2021, 11:44 PM

5. I used Brasso

with a soft (used) toothbrush. Gently scrub...rinse with hot water (again using the toothbrush to remove residue) and then repeat. In really hard spots I would let the Brasso dry for an hour or so and then rinse.

When done, wipe with a clean, soft cloth.

I haven't tried the Dremel pads, but that's probably a good option.

Reply to this post

Back to top Alert abuse Link here Permalink


Response to GP6971 (Reply #5)

Tue Jan 19, 2021, 11:52 PM

7. As I said, doing it by hand is too much for my old hands

I'd rather save them for doing my needlework.

I also have some other metal items that are not brass and some things that are mounted on wooden bases, so I'm thinking Flitz with the Dremel would be safer than anything that needs rinsing and especially might need soaking like the vinegar method. I can tape off the wood parts when polishing with the Dremel to protect the wood.

Reply to this post

Back to top Alert abuse Link here Permalink


Response to csziggy (Original post)

Wed Jan 20, 2021, 12:24 AM

9. I can testify as a bartender who has polished

the brass beer towers at least 590 times, Bartenders Friend is great stuff. It will clean off the corrosion, and is as easy as the video suggests. If itís real bad, may have to apply a bit more elbow grease, but it works rreeaaaalllly well.

Reply to this post

Back to top Alert abuse Link here Permalink


Response to pnwest (Reply #9)

Wed Jan 20, 2021, 12:34 AM

11. I'm going to try it first

Maybe use the Dremel polishing pad with the more stubborn spots to save my hands. One major advantage is I can get it locally!

Reply to this post

Back to top Alert abuse Link here Permalink


Response to csziggy (Reply #11)

Wed Jan 20, 2021, 02:11 AM

12. Let me know how it goes!

Reply to this post

Back to top Alert abuse Link here Permalink

Reply to this thread